BackHomeBespoke watchStainless steel watch

Model No.: SEIKO caseSEIKO watch case

  • Material – HQ Stainless Steel 316L surgical grade
  • Description – Our in-house developed, manufactured and fully tested 37mm EXP case set. Integral brushed chapter ring. Screw Down 100M Crown. HQ Swiss Flat Sapphire Crystal expertly fitted by our in-house watchmaker clear with no AR – slightly raised with top bevel as oem – 20mm lugs compatible with SKX013 bracelets. Lugs not drilled right through exactly as oem. Crown at 3. Slim NH Case Back. NH movement compatibility ex. NH35/36/38. Case tested to 100M with no failures.
  • Dimensions – Diameter without crown 37mm, with crown 40mm – Total Thickness (case back to top of crystal) @12.25mm – Lugs 20mm – L2L 43mm – Crown diameter 6mm
  • Case Set Contents – Case complete with fitted sapphire crystal* – Slim Case Back – Case Back Gasket – 2 x 20mm Fat Spring Bars – Screw Down Crown + NH stem cut/fitted/cemented*
  • *Fitted by our in-house watchmaker
  • Finish – Full Polish – Linear Brush on the flat section of Case Back as oem
  • Information – Complete case with without Drilled through lugs. Fully Polished – Black sets available early in the new year. This is our tribute to the classic RX EXP with the sweet advantage of compatibility with SKX013 bracelets we stock both oyster and jubilee styles – Ideal for building a complete EXP mod, could not be easier simply drop in a movement, dial + hands and its done!

Description – The Famous and the very first of its kind Crystaltimes Replacement Case Body – Suitable for replacement of the SKX007 0020 200M Divers case -With Drilled Through Lugs*

*Great for easy strap and bracelet change – reducing the risk of marking/damaging your case

General Information:

  • Included FREE with every case – Crystal Gasket – Case Back Gasket – 2 x 22mm Fat Spring Bars
  • Material – HQ Stainless Steel 316L surgical grade
  • Suitability – Replacement for SKX007 0020 CASE
  • Information – Case Body with and without Drilled Lugs. Polished/Brushed and Black available with and without drilled through lugs. Suitable as the perfect replacement for a damaged SKX007 0020 case. All oem parts will fit this case. This is our tribute to the classic oem case. It is NOT and was never intended to be a 100% exact copy of the oem case e.g. to allow the fully drilled lugs to look sweet the outer profile of the lugs is made a little meatier. We believe we achieved a very nice balance between the oem look and our case. All oem parts are compatible and will fit this replacement case incl the oem Jubilee Bracelet. Takes fat 2.5mm spring bars.
  • NOTE – Aftermarket bracelets with SEL may in some rare instances require a slight adjustment on the SEL as they do even with the oem case in some instances.
  • Water Resistance – As oem – This case was tested to 350M during development and subsequent testing of actual production cases – no failures were recorded.
  • Additional info – Ideal for replacing a badly damaged case or building a complete mod without having to buy a complete watch and ending up only using the case! Black option now available in limited numbers.
  • The OG of SKX007 cases!

Finish

  1. Ocean Blue
  • Name:
  • E-Mail: *
  • Tel: *
  • Model No.: *
  • Address: *
  • Message: *
  •